Application Note

FS; Reviewed:
SPOC 06/8/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
4 of 37
B179-CS1KR75
3. Configure Avaya Communication Server 1000
This section describes the steps to configure the following, using CS 1000 Element Manager:
 SIP Line service
 SIP Line D-Channel
 Application Module Link (AML)
 Value Added Server (VAS)
 Zone for SIP phones
 SIP Line Route Data Block (RDB)
 SIP Line Virtual Trunk
 Media Gateway Controller
 SIP Line telephone corresponding to the B179 SIP Conference Phone
It is assumed that basic installation and configuration of the CS 1000 call server, signaling
server, and node have been completed. Additional configuration details are provided in [1, 2].
3.1. Log in to Element Manager (EM)
Access the Unified Communications Management (UCM) web based interface by using the URL
“http://<ip-address>” in an Internet browser window, where “<ip-address>” is the IP address of
the call server. Note that the IP address for the Call Server may vary, and in this case
“10.7.7.61” is used. Log in with the appropriate user ID and password.