Application Note

FS; Reviewed:
SPOC 06/8/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
26 of 37
B179-CS1KR75
4.2. Configure SIP Signalling Settings
To configure the SIP signalling settings, navigate to Settings  SIP, and fill in the following:
Under Account 1:
Enable account Select the Yes radio button
Account name Meaningful name for account status display on phone screen
User Extension (SIP User Name) of the SIP Line telephone configured
in Section 3.11
Realm Use the default of “*”
Authentication name Extension (SIP User Name) of the SIP Line telephone configured
in Section 3.11
Registrar and Proxy SIP domain configured in the CS 1000
Password The Station Control Password of the SIP Line telephone
configured in Section 3.11
Registration interval Enter a value (1800 was used in the sample configuration)
Under Advanced:
Enable Blind Transfer Select the No radio button
5
Outbound proxy Enter the IP address of the CS 1000 Node (see Figure 2), port
5070, and lr (loose routing), as shown
Under Transport:
Protocol Select the TCP or UDP radio button (UDP shown)
Local UDP Port Enter 5060
Click Save.
5
This feature is not yet supported in this configuration