Application Note

FS; Reviewed:
SPOC 06/8/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
17 of 37
B179-CS1KR75
3.9. Configure SIP Line Virtual Trunk
When the Routes and Trunks screen is displayed after adding the route in Section 3.8, click
Add trunk corresponding to the newly added route to add new trunk members. The following
screen shows the parameter settings for one of the trunks after they have been added. Set the
following parameters and leave default values for the remaining parameters. Click Save to save
the configuration changes.
Multiple trunk input number Enter the number of trunks (only shown
when adding trunks)
Trunk data block Select IP Trunk (IPTI)
Terminal number An available terminal number.
Designator field for trunk A descriptive text.
Extended trunk Select Virtual trunk (VTRK)
Route number, Member number Current route number and starting member.
(only shown when adding trunks)
Card density Select Octal Density (8D)
Start arrangement Incoming Select Wink or Fast Flash (WNK)
Start arrangement Outgoing Select Wink or Fast Flash (WNK)
Trunk group access restriction Desired trunk group access restriction level.
Channel ID for this trunk An available starting channel ID.