Application Note

FS; Reviewed:
SPOC 06/8/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
16 of 37
B179-CS1KR75
Route number (ROUT) Select a route number
Designator field for trunk (DES) Enter an appropriate name
Trunk type (TKTP) Select TIE trunk data block (TIE)
Incoming and outgoing trunk (ICOG) Select Incoming and Outgoing
(IAO)
Access code for the trunk route (ACOD) Enter the access code
The route is for a virtual trunk route (VTRK) Check the box
Zone for codec selection and bandwidth Enter a zone
3
management (ZONE)
Node ID of signaling server of this route (NODE) Enter the node ID of the SIP Line
Gateway
Protocol ID for the route (PCID) Select SIP Line (SIPL)
Integrated services digital network option (ISDN) Check the box
Mode of operation (MODE) Select Route uses ISDN Signaling
Link (ISLD)
D channel number (DCH) Enter the D-channel number
Interface type for route (IFC) Select Meridian M1 (SL1)
Network calling name allowed (NCNA) Check the box
Network call redirection (NCRD) Check the box
Trunk route optimization (TRO) Check the box
3
Note that this must be a zone of type VTRK and must be different than the zone created for the SIP phones in
Section 3.7. In the sample configuration, the VTRK zone was 1.