Application Note

FS; Reviewed:
SPOC 06/8/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
15 of 37
B179-CS1KR75
3.7. Configure Zone for SIP Phones
On the left column menu of the main Element Manager page, navigate to System  IP Network
 Zones. On the Zones page, select Bandwidth Zones (not shown), and on the Zone Basic
Property and Bandwidth Management page, enter a Zone number (ZONE) and an
appropriate Description. Defaults can be used for the remaining fields. Click Save.
3.8. Configure SIP Line Route Data Block (RDB)
On the left column menu of the main Element Manager page, navigate to Routes and Trunks 
Routes and Trunks. Click Add route for the appropriate customer number.
The following screen shows the parameter settings after the route has been added. Set the
following parameters and leave default values for the remaining parameters. The Basic Route
Options, Network Options, General Options, and Advanced Configurations sections (not
shown) can be left at the defaults. Click Submit (not shown) to save the configuration changes.