Application Note

TH; Reviewed:

SPOC 07/08/2011

Solution & Interoperability Test Lab Application Notes

4 of 35

B179_CS1K_60

3. Configure Avaya Communication Server 1000

This section describes the steps to configure the following, using CS 1000 Element Manager:

SIP Line service

SIP Line D-Channel

Application Module Link (AML)

Value Added Server (VAS)

Zone for SIP phones

SIP Line Route Data Block (RDB)

SIP Line Virtual Trunk

Media Gateway Controller

SIP Line telephone corresponding to the B179 SIP Conference Phone

It is assumed that basic installation and configuration of the CS 1000 call server, signaling server,

and node have been completed. Additional configuration details are provided in [1, 2].

3.1. Log in to Element Manager (EM)

Access the Unified Communications Management (UCM) web based interface by using the URL

“http://<ip-address>” in an Internet browser window, where “<ip-address>” is the IP address of the

UCM server.