Application Note

TH; Reviewed:
SPOC 07/08/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
26 of 35
B179_CS1K_60
4.2. Configure SIP Signalling Settings
To configure the SIP signalling settings, navigate to Settings  SIP, and fill in the following:
Under Account 1:
Enable account Select the Yes radio button
Account name Meaningful name for account status display on phone screen
User Extension (SIP User Name) of the SIP Line telephone configured
in Section 3.11
Realm Use the default of “*”
Registrar and Proxy SIP domain configured in the CS 1000, with Port number
Authentication name Extension (SIP User Name) of the SIP Line telephone configured
in Section 3.11
Password The Station Control Password of the SIP Line telephone
configured in Section 3.11
Registration interval Enter a value (300 was used in the sample configuration)
Under Advanced:
Enable blind transfer Select the No radio button
4
Outbound proxy No input was used in this configuration
Under Transport:
Protocol Select the TCP or UDP radio button (UDP shown)
Local Port Enter 5070
Click Save.
The SIP configuration screen is shown on the next page.
4
This feature is not yet supported in this configuration