User's Manual

09/27/2011

CS 2100 Interoperability Lab Application Notes

7 of 8

B179CS2100SE13.doc

5. Verification Steps

Once completed the phone should register with the CS 2100. This should be verified by the

square status identifier next to the lab on the screen. If the terminal has successfully register with

the CS 2100 this should show up as fully dark. If the box is outlined, then the user isn’t

registered with the call server and further investigation as to the reason for the failure may be

necessary.

If the phone has successfully registered, then verify calling capabilities as defined by the class of

service which the user account has been created under.

6. Conclusion

All Application Notes should have a two or more sentence conclusion outlining what the user

should have completed if followed.

7. Additional References

Document

Title

16-603915

Avaya B179 Administration Guide

NN10399-110

Communication Server 2000 – Adaptive Application Engine Configuration

NE10004-512

OSSGate User Guide

NN10399-109

CS 2000 Adaptive Application Engine – Using the Provisioning Client

8. Change History

This section is required only if the Application Notes are being re-issued. It should contain the

following table listing previous issue numbers and the dates of issue.

Issue

Date

Reason

1.0

8/25/2011

Initial issue

2.0

9/27/2011

Remove Solution Interoperability Test Lab reference