Release Notes

Page 6
Install the B169 Software
Restart the Avaya B169 in upgrade mode
 Connect the Avaya B169 to the PC using the USB cable.
 Press and Navigate to SETTINGS > UPGRADE MODE.
 Confirm that you want to restart in upgrade mode by pressing OK or cancel the restart
procedure by pressing Cancel/back, .
Install the upgrade:
 Start the Avaya Upgrade utility software on your computer from the Start menu.
 Select Avaya B169 and press Next
 A message regarding connection appears, press Next
 Press Browse and navigate to the Avaya B169 Wireless Conference Phone release 1.1 software
you downloaded previous, then press Install
 Wait for the upgrade to complete
Interoperability
The Avaya B169 Conference Phone with release 1.2 software is certified to interoperate only with the
analog base station shipped with it or another B169. Interoperability with other DECT radio base stations
is not supported with this release.
The B169 conference phone is supported on the following call servers using an analog extension:
Server
Releases
Communication Manager
CM 5.2.1+
Avaya Aura
AURA 6.0+
IP Office
IPO 6.1+
Communication Server 1000
CS1000 6.0+
Other configurations of call servers and circuit boards were not tested and interoperability cannot be
guaranteed.