User's Manual

Button Description
Session Manager list for the selected date
range. This output displays the following
details:
Note:
Number of retrieved records shows the
number of records that matched the filter
criteria. If Session Manager displays
fewer records than this number, it means
that not all the matching records are
displayed. Usually this is done to avoid
problems caused by running out of
memory. In such cases, you can further
configure or refine the filter criteria in such
a way that all the log entries are
displayed.
Call Routing Test
About Call Routing Testing
Call routing tests are used to test routing of a SIP INVITE based on the current Session
Manager administration options that you select. You can use it to verify that you have
administered the Session Manager as intended before placing it into service, or to get feedback
on why a certain type of call is not being routed as expected. The testing of call routing using
Session Manager does not send any “real” SIP messages. It invokes call processing in the
debug mode to test routing.
Call Routing Test page field descriptions
Name
Description
Calling Party URI The SIP URI of the calling party. You must
specify a handle and a domain, for example,
[e-mail]. You can also
specify a full URI such as sip:
[e-mail]:
5060;sometag=3;othertag=4. You can also
copy a URI recorded in a SIP trace and use
it.
Calling Party Address The IP address or host name from which the
INVITE is received. For routing, this is the IP
System Tools
Administering Avaya Aura
®
Session Manager November 2010 455