Datasheet

Parameter Specifications
Average receive power for BER 10
-12
– 15.8 dBm to – 1.0 dBm
Maximum receive power for damage 4.0 dBm
Maximum receiver sensitivity in OMA – 14.1 dBm
Maximum receiver reflectance – 26 dB
Stressed receiver sensitivity in OMA – 11.3 dBm
Receive electrical 3 dB upper cutoff
frequency (maximum)
12.3 GHz
Examples of an OFF transmitter are as follows: no power supplied to the PDM, laser shutdown
for safety conditions, activation of a PMD_global_transmit_disable or other optional transmitter
shut down conditions.
10GBASE-ZR/ZW XFP specifications
The following table lists the transmit and receive specifications for the 10GBASE-ZR/ZW XFP.
The reach is up to 80 km at a wavelength of 1550 nm. The part number of this XFP is
AA1403006-E5.
For more information about the 10GBASE-ZX XFP, including test and measurement
information and more specifications, see the IEEE 802.3ae standard.
Caution:
Risk of BER increase
For proper XFP operation, ensure that at least 11 dB of attenuation is present between the
transmit and receive ports.
Table 31: 10GBASE-ZR/ZW XFP specifications
Parameter Specifications
Line rate (nominal) 10GBASE-ZR 10.3125 Gb/s ±100 ppm (10
GbE)
10GBASE-ZW 9.95328 Gb/s ±20 ppm
(OC-192)
MTBF 675 000 hours
Distance Up to 80 km
Link optical power budget 24 dB
Maximum transmitter and dispersion penalty 3.0 dB at 80 km (G.652 fiber)
Transmitter characteristics
10GBASE-ZR/ZW XFP specifications
Installation — SFPs and XFPs December 2010 61