Datasheet

Chapter 7: XFP specifications
This section provides technical specifications for the supported 10 gigabit SFP (XFP) models. Use these
specifications to aid in network design.
The specifications in this section are a subset of the IEEE 802.3ae and 802.3aq specifications. For more
information, see these standards documents. All Avaya XFPs meet or exceed these standards.
Important:
Avaya recommends that you only use Avaya-qualified XFPs. If you do choose to use other vendor
XFPs, be aware that Avaya does not support the use of other XFPs.
Navigation
• XFP labels on page 53
• General XFP specifications on page 54
• 10GBASE-SR XFP specifications on page 54
• 10GBASE-LRM XFP specifications on page 56
•
10GBASE-LR/LW XFP specifications on page 58
• 10GBASE-ER/EW XFP specifications on page 60
• 10GBASE-ZR/ZW XFP specifications on page 61
XFP labels
As shown in the following figure, the Avaya label on a typical XFP contains a Avaya serial
number, a bar code, a manufacturer code, an interface type, and a part number.
Installation — SFPs and XFPs December 2010 53