Datasheet

100BASE-FX SFP specifications
The 100BASE-FX SFP provides 100 Mb/s Ethernet Carrier Sense Multiple Access with
Collision Detection (CSMA-CD) connectivity using multimode optical fiber. The part number
for this model is AA1419074-E6
The 100BASE-FX SFP is supported on the 5600 Series switches, but not on the 5500 Series
switches.
The following table describes the 100BASE-FX SFP specifications.
Table 2: 100BASE-FX SFP specifications
Parameter Specifications
Maximum electrical power consumption 1.5 W
Connectors Duplex LC (Lucent connector)
Cabling
• 62.5 µm MMF optic cable
• 50 µm MMF optic cable
Distance Up to 2 km using 500 MHz-km MMF optic
cable
Wavelength 1310 nm
Link optical power budget 10 dB
Transmitter characteristics
Maximum launch power – 14 dBm
Minimum launch power – 23.5 to -20 dBm
Receiver characteristics
Receiver sensitivity – 33.5 dBm
Maximum input power —
T1 SFP specifications
The T1 SFP provides full-duplex Fast Ethernet to T1 connectivity. The part number for this
model is AA1419075-E6.
100BASE-FX SFP specifications
Installation — SFPs and XFPs December 2010 29