Datasheet

Model and connector Product number Description
1000BASE-SX (LC) AA1419013-E5 850 (nm), up to 275 or 550 m
1000BASE-SX (MT-RJ) AA1419014-E5 850 nm, up to 275 or 550 m
1000BASE-LX (LC) AA1419015-E5 1310 nm, up to 10 km
1000BASE-XD CWDM (LC) AA1419025-E5 to
AA1419032-E5
1470 nm to 1610 nm, up to 40
km
1000BASE-ZX CWDM (LC) AA1419033-E5 to
AA1419040-E5
1470 nm to 1610 nm, up to 70
km
100BASE-FX (LC)
NOTE: Only the 5600 Series
switches support this SFP.
AA1419074-E6 1310 nanometers (nm), up to
2 km
T1 (RJ-48C) AA1419075-E6
1.544 Mb/s Fast Ethernet to
T1 remote bridge.
For more information about specifications for these SFPs, see SFP specifications on
page 27.
Job aid
You can use a Digital Diagnostic Indicating (DDI) SFP in an Ethernet Routing Switch module
that supports SFPs. The switch supports the optical functions of the SFP. A future release will
provide access to the DDI information.
The SFPs described in this section are all RoHS -E6 compliant.
The following table lists and describes the Avaya SFP models with DDI capability. All these
SFPs use LC connectors.
Model Product number Description
1000BASE-T (RJ-45) AA1419043-E6 CAT5 UTP, up to 100 m.
Because the 1000BASE-T
device is all electrical, there
is no need for DDI support.
1000BASE-SX AA1419048-E6 850 nm, up to 275 or 550 m
1000BASE-LX AA1419049-E6 1310 nm, up to 10 km
1000BASE-XD AA1419050-E6 1310 nm, up to 40 km
1000BASE-XD AA1419051-E6 1550 nm, up to 40 km
1000BASE-ZX AA1419052-E6 1550 nm, up to 70 km
1000BASE-XD CWDM
AA1419053-E6 to
AA1419060-E6
1470 nm to 1630 nm, up to 40
km
Selecting an SFP
Installation — SFPs and XFPs December 2010 21