User Guide

Telephone settings

208

Activating Caller filter

To activate an accept or block list, perform the following steps:

4. Press the Up or Down key to highlight any entry.

5. Press the More soft key.

6. Press the Up or Down key to highlight the Delete

all option.

7. Press the Select soft key.

8. Press the Yes soft key to confirm the changes.

9. Use the Dialpad to enter the PIN code.

10. Press the OK soft key.

11. Press the Clr key one or more times to return to the

idle display.

Attention: If you activate the Caller filter and configure the accept list,

the handset accepts calls only from the numbers in the

caller filter list. If you configure the block list, the handset

blocks all calls from the numbers in the caller filter list.

1. Open the Caller filter menu using the steps in

“Accessing the Caller filter menu” (page 204).

Delete all

Select

Yes

Caller filter