Release Notes

311708-A Rev 00
27
CR 114325-1: Configuration Manager
When you try to modify a router’s configuration with Site Manager and the BCC
is in configuration mode on the router, you receive a message that says that you
need to exit configuration mode in the BCC and then either apply your changes in
Site Manager or select Cancel to get back to where you were in Site Manager. If
you do not exit BCC configuration mode and try to cancel out of Site Manager,
you cannot. The only way to get out of this screen is to exit BCC configuration
mode.
CR 114605-1: IPX
When you modify an existing IPX interface, Site Manager displays the invalid
value 3 in the RIP/SAP Immediate Update field when the configuration file is less
than BayRS Version 13.03.
CR 114675-1: NBIP
Deleting a circuit on which NBIP is configured fails to delete the corresponding
wfCircuitNameEntry for that circuit. This problem affects only circuits that have
been assigned circuit numbers that are greater than 9.
CR 116704-1: IP
Site Manager does not allow you to change the subnet value for a previously
configured IP interface.
CR 116745-1: ISDN
Trying to configure an ISDN port from the Add Circuit window (accessed from
Circuits > Add Circuits) causes a core dump.
CR 116749-1: ATM
When you try to change the ARP mode on a PVC service record from ARP to
None, Site Manager returns an error message.
CR 116853-1: Pktdump
The Pktdump utility Version 1.3 places an incorrect date on the packet.
CR 117033-1: Report Generator
When you view a report created with Report Generator, there is a discrepancy in
the value of the MIB attribute wfIpIntfCfgEntry.wfIpIntfCfgSlotMask is
2147483647. The value is on the report versus the actual value 4294705152 of the
MIB on the router.