Release Notes

311708-A Rev 00
25
CR 107685-1: IP
NAT allows you to configure a private to public address mapping to map to the
same IP address.
CR 107749-1: DLSw
When you enter service access points (SAPs) in DLSw, Site Manager accepts
values less than AA as two digits and does not allow any values greater than EC
except F0.
CR 108165-1: DNS Server
With DNS Proxy configured on the router, if you add and then delete DNS Client
on the router, the Create DNS Client option is unavailable.
CR 108209-1: System 5000
Configuring dual Ethernet on a System 5000 hub causes Site Manager to fault
when you attempt to add circuits in the Add Circuits window.
CR 108564-1: Frame relay
When configuring frame relay in Site Manager running under HP-UX, some
protocols cannot be chosen.
CR 109260-1: BGP
When you delete a BGP circuit using Site Manager, the options under Circuits are
limited to Add Circuit, even if multiple circuits exist.
CR 110025-1: Configuration Manager
The label on the Multiple Router Help screen says Multiple Switch instead of
Multiple Router.
CR 110338-1: IP traffic filters
When you modify a traffic filter after the remote WAN interface is disabled, the
filter fails.
CR 110436-1: ATM LANE
In the values selection window of Maximum Data Frame Size, the options for
9234 and 18190 are not available for a token ring LANE interface.
CR 110653-1: WCP
If you open a file in local mode that has WCP loaded on slots with a FRE2-060e
module, then save that file, the wfHwCompLoad MIB attribute is removed from
all slots.