Release Notes

10
311708-A Rev 00
CR 113784-1: VRRP
The BCN router/bridge stops forwarding packets if multiple Virtual Router IDs
are configured on the same LAN segment and a Not Owner Virtual Router is used
by hosts as the default gateway.
CR 113793-1: Technician Interface
A text error (a redundant “in”) appears in a reference to the “Quick-Starting
Routers” guide in the install.bat file.
CR 113931-1: DLSw
DLSw does not pass XID data in a REACH ACK frame.
CR 113969-1: DLSw
The router faults when the DLS TCP session for the backup peer goes down due
to inactivity (primary peer is up and operational, so backup peer is not used).
CR 114077-1: MOSPF
When you enter the “ip mospf_cache -sx” Technician Interface command, the slot
restarts.
CR 114211-1: IGMP
When you use Site Manager to dynamically configure an IGMP static group on a
synchronous interface, the router faults with a bus error.
CR 114317-1: OSPF
With a large number of frame relay direct mode PVCs all running OSPF and
MOSPF, resetting all ports at once will cause a fault.
CR 114349-1: Frame relay
Traffic shaping on a frame relay PVC causes a “scheduler exit due to orphaned
buffer” message.
CR 114395-1: X.25
When multiple IPEX connection requests are made and never acknowledged, a
fault occurs due to insufficient memory.
CR 114411-1: MIB II
The ifEntry for an interface that is part of an interface redundancy group shows an
incorrect line speed.