Deployment Guide

90 Avaya Video Conferencing Manager Deployment Guide
Restoring the Avaya Video Conferencing Manager Database from a Backup
Once you have created a copy of your database, you can recover or restore the files if
needed in the event of an equipment failure.
1. Click Browse and locate the proper .BAK file.
2. Click Restore Database.
Caution: This process cannot be undone.
Billing Information
Avaya Video Conferencing Manager uses billing information to estimate the cost of calls
placed with your audio and video communications devices. Click Billing Information to
update the cost per KB by location.
To add or update an entry, select the Country, State (if applicable), and Call Type, and
enter the Cost Per KB. The Currency you choose is used for all entries.
Note: Ensure that the country and state are also configured on the devices that you wish
to include in the billing reports. No data appears in billing reports if the country and
state are not set on the devices and in Avaya Video Conferencing Manager
Administrator.
Click Add/Update to save your changes, before you add or update another entry.
To delete an entry, select the Country, State (if applicable), and Call Type, and click Delete.
Conference Settings
Click Conference Settings to modify the following configuration settings for calls and
conferences:
• Monitor Call Statistics: Select this check box to enable Avaya Video Conferencing
Manager to compile statistics for managed calls.
• Show snapshots with call details: Select this check box to display a snapshot from
each participant in a call when viewing a call in progress from the Events page.
Note: Snapshots are available for managed Avaya and LifeSize devices only.
• Call Termination Alert Interval: Enter the time, in minutes, before the end of a call at
which time Avaya Video Conferencing Manager will send an alarm and email to the
administrator regarding a call's termination. The default is 15 minutes.