User's Manual

Administering Avaya Video Conferencing Solution 6.1 Issue 1 95
DRAFT
● Max Entries : enter the maximum number of matching entries that you want Avaya
one-X
®
Communicator to display. The default is 50.
Select the Use Active Directory GSS Bind check box, if you want Avaya one-X
®
Communicator
to use the current user’s login and password to bind with the Active Directory LDAP server.
IM and Presence screen
IM and Presence appears on the left pane only if you selected SIP protocol during this protocol.
Using this window, you can activate the native Avaya one-X
®
Communicator Instant Messaging
functionality. Click IM and Presence on the left pane of the General Settings window. The
Instant Messaging settings appear on the right pane of the General Settings window. Select the
Enable Instant Messaging service check box and set the following parameters:
● Server field : enter the IP address of IM and Presence Server.
● Select the Enable Local Message Archiving check box to store instant messages on
your hard disk drive.
Desktop Integration screen
Using Desktop integration settings, you can specify the directories Avaya one-X
®
Communicator searches when you use the Name Look-Up feature and set whether you want to
enable wipe-to-dial feature. Click Desktop Integration on the left pane of the General Settings
window. The Desktop Integration settings appear on the right pane of the General Settings
window. Perform one of the following steps in the Name Look-Up area:
1. Select the Microsoft Outlook Contacts check box if you want Avaya one-X
®
Communicator
to search contacts from Microsoft Outlook when you use the Name Look-Up feature.
Microsoft Outlook must be installed and running on your computer.
2. Select the IBM Lotus Notes Contacts check box if you want Avaya one- X Communicator to
search contacts from Lotus Notes Address Book when you use the Name Look-Up feature.
Lotus Notes Address Book must be installed and running on your computer.
3. • Select the Public Directory check box if you want Avaya one-X
®
Communicator to search
contacts in a public directory when you use the Name Look-Up feature. Public Directory
must be configured using the Public Directory settings.
4. Select the Enable wipe-to-dial (clipboard dialing) check box to enable the wipe-to-dial
feature. In any application, if you click a number that can be dialed, you can dial that
number from the Avaya one-X
®
Communicator icon in the system tray.