Manualshelf

User's Manual

ManualsBrandsAvaya Manualsvideo conferencing systemsAvaya 1000 Series Video Conferencing Systems
919293949596979899100
Administering Avaya Video Conferencing Solution 6.1 Issue 1 93
DRAFT
● Connection Type : click the type of connection for your network.
● Jitter Buffer : click the size of your Jitter Buffer. Set your Jitter Buffer according to
your network parameters and the packet losses. Avaya recommends you to set this
option to Automatic.
● Move the Receive Gain slider to set the gain for incoming sound during a call. Avaya
recommends you to set this option to 1.00.
● Move the Transmit Gain slider to set the gain for outgoing sound during a call. Avaya
recommends you to set this option to 0.35.
● Move the Jitter Buffer Low Water Mark slider to set the low water mark for the jitter
buffer. Avaya recommends you to set this option to minimum.
● Select Always use this value check box if you want Avaya one-X
®
Communicator to
always use the values you have set above.
Dialing Rules screen
1. Click Dialing Rules on the left pane of the General Settings window. The Dialing Rules
settings appear on the right pane of the General Settings window. In the Number to dial to
access an outside line field, enter the digit(s) you must dial to access an outside line. In the
Your country code field, enter the code for your country. In the Your area/city code field,
enter the area code or the city code where your phone server is located. You can enter
multiple codes and separate them with commas. For example, 406, 208. If you enter this
code, Avaya one-X
®
Communicator treats every call made to a region matching with either
406 or 208 as a local call. Set the following parameters:
● PBX Main Prefix : enter the main prefix of your PBX
● Number to dial for long distance calls : enter the digit(s) you must dial to make a
long distance call.
● Number to dial for international calls field : enter the digit(s) you must dial to make
an international call.
● Extension length for internal extensions calls : enter the number of digits that
comprise an internal extension. For example, if your internal extensions consist of five
digits, you would enter, any number that consists of five digits or less would be treated
as an internal extension. If your company supports internal extensions of varying
lengths (for example, three-digit, five-digit, and seven-digit extensions), you must
separate these lengths by commas and enter 3, 5, 7.