User's Manual

88 Administering Avaya Video Conferencing Solution 6.0.1 Issue 2.1 April 15, 2011
● DTMF over IP : in-band
● Survivable COR : internal
● Survivable trunk dest : Y
● Authentication reqd : Y
Configuring Polycom VBP-E
To configure a Polycom VBP-E using Communication Manager complete the following
procedure:
1. On SAT, enter change signalling group n (where n is the group number) and set the
following parameters:
● IP Video : Y
● Near end listen port : 1720
● Far end listen port : 1720
● LRQ required : N
● RRQ required : N
2. Enter change trunk group n (where n is the group number) and set the following
parameters :
● Group type : ISDN
● Direction : Two Way
3. Enter change ip network region n (where n is the region number) and set the
following parameters:
● Intra region IP-IP Direct audio : N
● Inter region IP-IP Direct audio : N