User's Manual

Administering and setting up video H.323 endpoints
Administering Avaya Video Conferencing Solution 6.0.1 Issue 2.1 April 15, 2011 87
video conferencing ports allowed is 48. This is a license count that Avaya provides
based on your stated needs. Licensing and administration are two different decisions
on port counts.
Configuring Class of Service
Enter change cos and set the following parameters:
● Ad-hoc Video Conferencing : appropriate COS level
Configuring a Video Bridge
Enter add video-bridge n (where n is the bridge number between 1 to 40, and each video
bridge belongs to an MCU) and set the following parameters:
● Name : assign the bridge a name
● Max Ports : equivalent to the number of ports that are available for use
● Trunk Groups : the administered incoming or outgoing ISDN H.323 or SIP trunk groups
added for the MGC
● Far End Resource Info : N
● ID Range : correspond to the actual conference ID numbers of meeting rooms configured
on the MGC
Configuring stations to support a Tandberg MXP
This section describes how to configure stations to support Tandberg MXP series video
conferencing.
On SAT, enter add station n (where n is the extension of an available station) and set the
following parameters:
● Type : H.323
● Name : Tandberg MXP
● Lock messages : N
● Hunt to station tests : Y
● COR : 1
● COS : 1
● IP video : Y