User's Manual

76 Administering Avaya Video Conferencing Solution 6.0.1 Issue 2.1 April 15, 2011
● Far-end Network Region : the appropriate IP network region.
● Direct IP-IP Audio Connections : Y
● IP Audio Hairpinning : N
Adding an Outbound Trunk Group for the Gatekeeper
To add an outbound trunk group for the system, enter add trunk-group n (where n is the
chosen trunk group) and set the following parameters:
● Group Type : ISDN
● Carrier Medium : IP
On page 5 of the Trunk Group screen add members to the trunk group.
Modifying the Outbound Signaling Group
To modify the outbound signaling group for the system, enter change signaling-group n
(where n is the signaling group you added) and set the following parameters:
● Trunk Group for Channel Selection : the trunk group you just added.
Creating a Route Pattern for the Gatekeeper
To create a route pattern that points to the trunk group, enter change route-pattern n
(where n is the route pattern you want to use) and set the following parameters
● Grp No : enter the number of the trunk group you created for the system.
Adding an Inbound Signaling Group for the Gatekeeper
To add an inbound signaling group for the system, enter add signaling-group n (where n is
the chosen signaling group) and set the following parameters:
● Group Type : H.323
● IP Video : Y
● Priority Video : Y, if you want all incoming calls to receive priority video transmissions.
● Near-end Listen Port : 1720
● LRQ Required : N