User's Manual

70 Administering Avaya Video Conferencing Solution 6.0.1 Issue 2.1 April 15, 2011
Adding users to Avaya 1000 series and one-X
®
Communicator video
endpoints and users using System Manager
6. To create a New User Profile on System Manager, on the interface, click Users > Manage
Users and then on New to open the New User Profile page. Fill in the following fields:
● Last Name
● First Name
● Login Name : Example: ext@sip domain
● Authentication Type : Basic
● SMGR Login Password
● Shared Communication Profile Password : Corresponds to the authorization
password for the series 1000 video endpoints and the password for one-X
®
Communicator.
7. To assign an address to the user, on the New User Profile page, click the Communication
Profile drop-down arrow and under Communication Address click New. Set the following
parameters:
● Type : Avaya SIP
● Fully Qualified Address : ext@sip domain, which must match the Login Name in
step 1
8. To enable Session Manager Profile, Select the check box corresponding to Session
Manager profile and set the following parameters:
● Primary Session Manager : Appropriate option
● Secondary Session Manager : None
● Origination Application Sequence : Appropriate Communication Manager Server
● Terminating Application Sequence : Appropriate Communication Manager Server
● Survivability Server : None
● Home Location : Appropriate option
9. To create an Endpoint Profile, Communication Profile > New User Profile, check the box
corresponding to Endpoint Profile. Select the appropriate Communication Manager
system and set the following parameters:
● Extension : same as ext from step 2
● Template : Avaya recommends naming the template according to its AV10x0 type and
Communication Manager release, such as AV1010_CM_6_0.
● Port : IP
10. Click Commit.