User's Manual

Administering Avaya Video Conferencing Solution 6.0.1 Issue 2.1 April 15, 2011 59
Administering Avaya Aura
®
Communication Manager for
video endpoints
This section of the guide explains the procedure to administer Communication Manager for all
video endpoints.
Communication Manager Global Administration
1. On SAT, enter change system-parameters customer-options, and set the following
parameters:
Maximum Video Capable H.323 Stations : 1x the number of single point Polycom VSX
systems.
Maximum Video Capable IP Softphones : equal to the number of video softphones.
Maximum Administered Ad-hoc Video Conferencing Ports : based on the number of
RMX systems and the maximum port count capability for the RMX systems.
2. On SAT, enter change system-parameters customer-options and set the
following parameters:
Enhanced Conferencing : Y
IP Trunks : Y
IP Stations : Y
ISDN-BRI Trunks : Y
ISDN-PRI : Y
Multimedia Call Handling (Basic) : N
Multimedia Call Handling (Enhanced) : N
3. On SAT, enter change ip-network-region and set the following parameters:
Intra-region IP-IP Direct Audio : Y
Inter-region IP-IP Direct Audio : Y
Note:
Note: For network regions containing third-party gatekeepers, these values must be set
to No for direct audio because shuffling may not be supported by all third-party
endpoints.