User's Manual

Administering Conferencing and Bridges
54 Administering Avaya Video Conferencing Solution 6.0.1 Issue 2.1 April 15, 2011
Configuring Avaya Aura
®
Conferencing
You must have administrator permission to edit the configuration and reboot the system for the
changes to take effect.
To configure the Avaya Aura
®
Conferencing:
1. Navigate to Configuration > Slot Configuration > Configure Video
2. From the Slot number for the card drop-down list box, select the MPC slot.
3. Set the following parameters in the Configure Video dialog box:
● Video MTU to 1492.
● Video Maximum Desired Bandwidth to 768.
● Enable the SIP-INFO check box in Video I-Frame Request Method(s).
4. In the Configure Video Codec List dialog box, set the following parameters for Entry #1:
● Codec: H.263
● Picture Size: CIF
● MPI: 1
5. In the Configure Resource Allocation dialog box, set Video Resource Allocation
(percentage) to 50. When resources are set to 50 percent, and the MPC contains 50 ports,
25 ports are set for video, and 25 ports are set for audio.
Example:
1 MPC = 750 callers
50% video on MPC = 125 (Maximum video allowed per MPC = 250 > 128 bit rate)
Total audio callers can use: 375 - 125 = 250