User's Manual

Administering Conferencing and Bridges
48 Administering Avaya Video Conferencing Solution 6.0.1 Issue 2.1 April 15, 2011
● DIRECT to go directly into a pre-configured conference.
Example:
cbutil add 24049 0 301 1 n DIRECT -1 Adhoc in Avaya
DNIS Grp Msg PS CP Function Line Name Company Name
---------- -------- ------- ----- ------ -------------- --------------- --------------------
24047 0 247 1 N SCAN Schedule Avaya
24049 0 301 1 N DIRECT Adhoc Avaya
4. Using a text editor, open the file /usr/ipcb/config/telnumToURI.tab to configure the dial
outs for the Conferencing. Your dial outs are configured on the bridge in /usr/ipcb/config/
telnumToURI.tab. See the following example:
TelnumPattern TelnumConversion comment
* "<sip:$1@<proxyipaddress>:5061;transport=tls>" SES Proxy
40??? "<sip:$1<C-LAN_address>:5061;transport=tls>" ACM
5. Using a text editor, open the file /usr/ipcb/config/processTable.cfg to configure
Conferencing for Radisys CMS600. The convMS process implements the Radisys CMS600
media server interface. See the following figure for an example of the processTable.cfg file.
6. Perform the following steps to configure the Ad-hoc video conferencing parameters on the
Conferencing:
a. On Avaya Aura
®
conferencing, configure the following values in the file usr/ipcb/config/
system.cfg:
● AdhocConferenceURIPattern
● AdhocMinPortsAvailable
● AdhocDefaultConferenceSize
● RAINotificationInterval
● RAIHighThreshold
● RAILowThreshold
● MaxRAISubscribers