User's Manual

Configuring the Avaya Aura
®
Conferencing 6.0 Standard Edition
Administering Avaya Video Conferencing Solution 6.0.1 Issue 2.1 April 15, 2011 47
● VideoSpeakersees
Valid entries are current and previous. The default is previous.
● VideoSize
Valid entries are CIF and QCIF. The default is CIF.
● VideoBandwidth
Valid entries are 128, 192, 256, 384, 512, and 768 Kbit/s. The default is 384 Kbits/s.
● VideoMPI
This parameter sets the minimum picture interval. Valid entries are 1 through 32. The
default is 4. (VideoMPI=1 equals 30 fps.)
The following is an example of the mediaServerInterface.cfg settings:
#Audio recording server
NFSServerIPAddress=xxx.xxx.xxx.xxx
MediaServerIP_1=xxx.xxx.xxx.xxx
MediaServerName_1=mpc2
MediaServerInterfaceSipListenPort_1=5050
# Video Params
# Set EnableVideoSupport to’1’ to enable video support and’0’ to disable
EnableVideoSupport=1
VideoSI=2
VideoSpeakersees=previous
VideoSize=CIF
VideoBandwidth=384
VideoMPI=4
3. At the command prompt, enter cbutil add, to add the call branding digits that you use to
dial into the bridge. You can configure:
● SCAN to prompt the user for conference codes.