User's Manual

Administering Avaya Video Conferencing Solution 6.0.1 Issue 2.1 April 15,
Chapter 3: Administering Conferencing and Bridges
This section of the guide explains how to set up Conferencing and Bridges.
This section explains the administration of the following:
1. Configuring the S6800 bridge
2. Configuring Avaya Aura
®
Conferencing
Configuring the Avaya Aura
®
Conferencing 6.0 Standard
Edition
In this section, you will:
1. Configure Conferencing for TLS or TCP so it will be able to communicate with
Communication Manager.
2. Configure the non-Ad-hoc video conferencing parameters for the Conferencing.
3. Configure the call branding digits that you will use to dial into the Conferencing.
4. Configure the dial outs for the Conferencing.
5. Configure Conferencing for Radisys CMS 6000.
6. Configure the Ad-hoc video conferencing parameters on the Conferencing.
7. Schedule conferences on Conferencing to ensure correct operation.
Note:
Note: You must log into the Conferencing using ssh with craft and su to sroot. All
configuration changes except cbutil require a system reboot for the changes to
take effect.
To configure the Conferencing:
1. Using a text editor, open the file /usr/ipcb/config/system.cfg, and make sure the following
parameters are configured:
● MyListener
● respContact
● MaxChannelCount