User's Manual

Administration
Administering Avaya Video Conferencing Solutions 6.1 35
DRAFT
Network Regions field descriptions
codec-set
Valid Entry Usage
1 to 7
pstn blank
The codec set used between two regions. This field
cannot be blank if this route through two regions is
being used by some nonadjacent pair of regions. If
the two regions are not connected at all, this field
should be blank.
direct-WAN
Indicates whether the two regions (source and destination) are directly connected by a WAN
link. The default value is enabled if a codec-set is administered.
WAN-BW-limits (Units)
Valid Entry Usage
Calls
Dynamic
kbps
Mbps
blank for No Limit
The unit of measure corresponding to the value
entered for bandwidth limitation. Bandwidth should be
limited by the number of connections, bandwidth in
kbps, Mbps, or left blank. Default is blank.
WAN-BW-limits (Total)
Valid Entry Usage
1 to 9999
For units in Kbits
1 to 65 For units in Mbits
blank If no limits. This is the default setting.
The bandwidth limits for direct WAN links. Values for this field can be entered in the number of
connections,