User's Manual

Design and deployment
28 Administering Avaya Video Conferencing Solutions 6.1
DRAFT
See Setting up locations on page 32 for setting up bandwidth pools using Locations.
Example 3: SIP audio and video -
Bandwidth settings for SIP audio and video pools
Total Bandwidth Audio
Bandwidth
Pool
Video
Bandwidth
Pool
Share
Bandwidth
Pools?
100 Mbps 20 Mbps 80 Mbps yes
In this example, you want to allocate bandwidth for audio
and video with most of the bandwidth going toward video.
Bandwidth settings for SIP audio and video pools
shows how you would configure the
bandwidth for a single location.
See Setting up locations on page 32 for setting up bandwidth pools using Locations.
Combination H.323 and SIP endpoints
When the enterprise uses both H.323 and SIP endpoints, bandwidth is divided up by
geographical location and then by H.323 and SIP endpoints. Within the Network Region, H.323
endpoints may be divided further by type of user.
You use the same formula as in SIP-only endpoints
on page 25 to calculate the average
bandwidth per call within your enterprise for the SIP endpoints.
Bandwidth allocation for combined solution
on page 28 shows one example of bandwidth
allocation between two geographical areas, two endpoint types, and type of user.
Figure 7: Bandwidth allocation for combined solution
Loc CM
NR 100
Virtual Location
Virtual NR
WAN Cloud
100 Mbps
50 Mbps
25 Mbps
50 Mbps
Network Pipe from
Site 1
Total BW: 150
Network Pipe from
Site 2
Total BW: 75
cycmlocc LAO 111710
Site 1
NR 1
Loc A
Video Pool
Audio Pool
Audio Pool
Normal Video Pool
Priority Video Pool
Site 2
NR 2
Loc B
Video Pool
Audio Pool
Audio Pool
Normal Video Pool
Priority Video Pool
This enterprise has 225 Mbps of bandwidth available with 125 Mbps available for SIP endpoints
and 100 Mbps available for H.323 endpoints.