Manualshelf

Deployment Guide

ManualsBrandsAvaya Manualsvideo conferencing systemsAvaya 1000 Series Video Conferencing Systems
81828384858687888990
Avaya Video Conferencing Manager Deployment Guide 89
Conference Settings
Click Conference Settings to modify the following configuration settings for calls and conferences. Click
Save for your changes to take effect.
Email Settings
Click Email Settings to modify the following configuration settings for email alerts and messages. Click
Save for your changes to take effect.
Setting Description
Monitor call statistics Select this checkbox to compile statistics for managed calls.
Show snapshots with
call details
Select this checkbox to show a snapshot from each participant in a call when viewing a
call in progress from the Events page.
NOTE: Snapshots are available for managed LifeSize, LG, and Avaya devices only.
Collect call statistics Select this checkbox to show a statistics graph from each participant in a call when
viewing a call in progress or completed calls from the Events page.
Call Termination Alert
Interval
Enter the time, in minutes, before the end of a call at which time Avaya Video
Conferencing Manager will send an alarm and email to the administrator regarding a
call's termination. The default is 15 minutes.
Call Statistics
Monitoring Interval
Enter the time interval to define the frequency at which Avaya Video Conferencing
Manager polls current call statistics.
NOTE: The default setting of 3 minutes may cause high CPU usage for the
LSCService.exe
process during calls and slow response to tasks performed with the
user interface. Depending on the volume of calls and the CPU requirements of other
applications running on the server, you may wish to disable Monitor call statistics or
increase the time interval.
Call Retry Attempts Enter the number of times a conference will retry a failed call. The default is 1.
Setting Description
SMTP Server Enter the address of the SMTP server Avaya Video Conferencing Manager uses to send
emails about alarms. For Microsoft Exchange enabled users, use the email server
address you specified for the Microsoft Exchange Server IP in the Mail Integration
Settings page.
Email Address Enter the addresses of recipients of email alerts. You can enter multiple addresses
separated by commas.
From Address Enter the address to use for the source of the email alerts.