Deployment Guide

Avaya Video Conferencing Manager Deployment Guide 50
Avaya Video Conferencing Manager sends an individual response email (success or failure) to indicate the
result of the action taken on each of the devices. If Avaya Video Conferencing Manager does not
recognize any of the emails, then no action or response email is sent. Email commands are not supported
with external devices.
The Conference audit report available from the Reports page includes EMAIL as a call source type for
calls initiated through email commands. The User audit report reflects the conferences initiated by users
using email commands. Read more at Generating Reports.
You can disable this feature by clearing Enable device management through email on the Mail
Integration Settings page in Avaya Video Conferencing Manager Administrator.
DESCRIBE
DESC
All managed devices Retrieves the details of the devices. This information appears
on the Device details page of a managed device.
MESSAGE Avaya
LG
LifeSize
Polycom
Tandberg
Shows a message in the display of the video system. Use
only ASCII characters. Enter the message in the body of the
email. Delete signature information or other text that
automatically appears in the body of the message.
Avaya Video Conferencing Manager truncates messages that
exceed the following number of characters:
Avaya, LG, and LifeSize: 200
Polycom: 100
Tandberg: 40
SNAPSHOT Avaya
LG
LifeSize
Retrieves the current video snapshot on the device as a .jpg
attachment to a reply email.
AUTOSH Avaya
LG
LifeSize
Executes a command line interface (CLI) command. Enter
AUTOSH in the Subject field and the CLI command in the
body of the message (for example, get system name).
Command Applies to these Makes Action Executed on the Device