Deployment Guide

Avaya Video Conferencing Manager Deployment Guide 48
Follow these steps to specify a trap destination to forward traps from a single device:
1. On the Devices page, use the Browse window to list managed devices.
2. Double-click the device entry; or click the device entry, , Configuration, and View details.
3. Click the Northbound tab.
NOTE If trap forwarding is disabled in Avaya Video Conferencing Manager
Administrator, the Northbound tab on the Device details page is not
available.
4. Click Add.
5. Enter the following information about the SNMP trap destination:
- IP address
- port number on which the remote SNMP manager is listening for traps
- username (not to exceed 40 characters)
- password (not to exceed 40 characters)
6. Click Save. The entry appears in the table above Add.
NOTE To edit or delete an SNMP trap destination, click or in the Actions
column.