Owner's Manual

Table Of Contents

Step 1. Connect the speaker cable from (+) terminal of the ampliﬁer to (+) terminal of the subwoofer.

Step 2. Connect the speaker cable from (-) terminal of the ampliﬁer to (-) terminal of the subwoofer.

Step 1. Connect one end of the power cable from (+) terminal of the battery and the second end to the amplifier terminal marked

with +12V. Do not forget to protect positive power cable with appropriate fuse.

Step 2. Connect one end of the power cable from (-) terminal of the battery and the second end of the grounding cable to the

terminals marked with GND.

Step 3. Connect one end of the cable to the Remote output terminal at the HU and the second end to the amplifier terminal marked

with REM.

Standard wiring diagram of two-channel amplifier to one subwoofer

Standard wiring diagram of two-channel amplifier to battery

min. 4 Ohm

BATTERY

5/FL

Step 1. Connect one end of the RCA cable to the RCA output terminals at the HU and the second end to the amplifier

RCA inputs terminals marked with INPUT.

Standard wiring diagram of two-channel amplifier to Head Unit

not more 40 cm

For model ABR-200.2 the operating voltage is 9-15 V.

Caution!!! The minimum permissible connection load impedance for bridged connection is 4 ohm.