User Manual

USB Power Socket
( User Manual )
Item No: AFC01US
www.avatarcontrols.com
90mm
90mm
User Manual
Thank you for your purchase of the AvatarControls Freecube series products. it is the
first modular DIY product of its kind. The kit starts with the Freecube USB Power Socket
base and a variety of attachments, which includes USB Power Socket, Bluetooth Speaker,
LED Sensor Light, Wireless Charger and much more to come. The combination of the
Freecube USB Power Socket base and its accessories are limitless. Hopefully you will find
a combination that will bring enjoyment and convenience to your life and work.
Packing List:
USB Power Socket * 1
Top Cover *1
User Manual *1
USB Charging
Indicator Light
Touch Power Button
OFF: 4 x outlets power off
Green: 4 x outlets power on
• Input Current : AC 120V
• Max Wattage : 1875W
• Max Current : 15A
• USB Total Output : 5V (DC ) 3A
• Working Temperature : 14°F ~ 140°F（-10℃~60℃）
• Storage Temperature : 14°F ~ 140°F（-10℃~60℃）
• Storage Humidity: 5%-95% (No condensate beads)
• Dimensions(WxDxH) : 4.6 x 4.6 x 2.2 in (116 x 116 x 55mm)
Protection Door
4 X Outlets
Power Cable
---
Specification：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions：
（1）this device may not cause harmful interference.
（2）this device must accept any interference received, including interference that may
cause undesired operation.
Made in China
Attention:
Do not coil the extension cords when use the USB Power Socket base, otherwise the
actual load current value may be less than its rated value. When multiple plugs are
inserted at the same time, the total load power shall not exceed the maximum allowable
power. The product is for indoor use only.
Warranty Card
User Name:
Address:
Contact :
Order Date:
Guarantee Clause:
• Within 7 days since goods are sold, if there is performance failure, commodity itself
and the outer package is complete (no scratches), can replace the sample type of
goods, not including man-made damage.
• The goods are guaranteed for one year from the date of sale. The accessories are
not covered by the warranty.
• The warranty service will be only effective under normal use.
• All the man-made damage, disassemble, stripping, improper use etc., is not covered
by warranty.
• The warranty card must be provided when ask for warranty. Failure to provide this card
or alter the card without permission, the company has privilege to refuse warranty.
Bluetooth Speaker
( User Manual )
Item No: AFCS01
www.avatarcontrols.com
User Manual
Packing List:
Bluetooth Speaker * 1
User Manual * 1
Product Appearance:
Thank you for choosing the Bluetooth Speaker by AvatarControls. This product is part
of the Freecube series and will function with the AvatarControls Freecube USB power
Socket Base or independently on its own. For the best experience with your Bluetooth
Speaker, please read the user manual carefully before use. The user manual includes
an introduction to the product, detail directions and as well as important safety
information.
TF Card Slot
Micro USB
For Charging
Reset Hole
Next / Volume Up
Play / Pause Button
Previous / Volume Down
• SNR : 89DB
• Micro USB Input : 5V/1A
• Input Voltage : 5V/24V DC
• Built in Battery: 2200mAh
• Audio Power Output : 5W*2
• Bluetooth Connection Distance: ≤32.8ft ( ≤10m)
• Working Temperature: 14°F~140°F （-10℃~60℃）
• Dimensions(WxDxH) : 4.6 x 4.6 x 2.5 in（116 x 116 x 63mm）
Specification：
How to use:
1. Assembly
•
The Bluetooth Speaker can be placed on any layer and any direction of the
Freecube. The Bluetooth Speaker can be used once the metal connection is
placed on the Freecube. The Freecube will automatically charge the speaker
while in use.
2. External powered
•
The Bluetooth Speaker can be used independently without the Freecube USB
power Socket Base. A micro USB cable can be used to supply the power and
charge the battery. In external powered mode, if the machine is turned off, the
indicator light will show the battery's charging state by illuminating a red light.
3. Battery powered
•
The Bluetooth Speaker comes with a built-in battery, which allows the speaker work
independently for 4-12 hours.
4. Bluetooth music playback
•
Search and pair "Freecube" Bluetooth settings on your phone. Once the connection
is successful, you can start using it.
5. TF Card music playback
•
Insert TF card, the speaker will automatically start playing music files stored in the TF card.
If the bluetooth is connected at the same time, you can easily switch between TF card
mode and Bluetooth mode by double clicking the play button.
Note: The device has Bluetooth mode and TF card mode. You can play audio files
transmitted by Bluetooth in Bluetooth mode. You can also play MP3 and WAV files
stored in TF card while in TF Card mode.
Operation Instruction:
Switches Mode
Turn on Press “ ” Green
Turn off Press “ ” and Hold for 2s Off
Play Press “ ” Green
Pause Press “ ” Green Flashing
Next Press “ ” No change
Previous Press “ ” No change
Volume Up Press & Hold “ ” Beep Sound
Volume Down Press & Hold “ ” Beep Sound
Disconnect
Bluetooth
Beep Sound
Double Click “ ”
Voice prompts
Press & Hold “ ” &
“ ” at the same time
Function Operation Indicator light
• Don't hit Bluetooth speaker badly.
• Don’t contact benzene, diluent and other chemicals.
• Don't get close to magnetic and electric field.
• Avoid direct rays or heating appliances.
• Don't disassemble, repair and rebuild.
• Please properly classify and dispose of waste packaging, batteries, old electronic products.
Attention:
Troubleshooting:
Problem What to do
No power
(Battery Mode)
The state of battery may be in protection mode or discharged.
Please charge it and it is recommended to use the speaker after
2 hours charging.
No sound from your
Bluetooth speaker
• Power on the speaker.
• Make sure the speaker is in Bluetooth mode or TF card mode.
• Increase the volume on the speaker, your mobile device and
music source.
• Move your mobile device closer to the speaker and away from
any interference or obstructions.
• Use a different music source.
• Pair another mobile device.
• If two mobile devices are connected, pause your other mobile
device first.
• On your mobile device:
- Turn off and on the Bluetooth feature.
- Remove the speaker from the Bluetooth menu. Pair again.
• Clear the speaker’s pairing list.
• Reset the speaker.
• Check your mobile device for compatibility. Refer to your mobile
device owner’s guide.
Problem What to do
Poor sound quality
• Use a different music source
• Pair another mobile device.
• Disconnect the second device.
• Move your mobile device closer to the speaker and away from
any interference or obstructions.
No music plays
from TF card
The speaker only supports music in MP3 and WAV formats.
Other formats of music are not supported.
The Bluetooth
Speaker does
not respond
when the power
supply is connected
Push the reset button to return the Bluetooth Speaker to its
original factory settings.
After a few hours
of charging, the
battery does not
perform for the
expected time.
Please make sure the music function is off during charge.
The charging time will be extended while playing music.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions：
（1）this device may not cause harmful interference.
（2）this device must accept any interference received, including interference that may
cause undesired operation.
Made in China
( User Manual )
LED Sensor Light
Item No: AFCL01
www.avatarcontrols.com
User Manual
Packing List:
LED Sensor Light * 1
User Manual
* 1
Thank you for choosing the LED Sensor Light by AvatarControls. This product is part of
the Freecube series and will only function with the AvatarControls Freecube USB Power
Socket Base. For the best experience with your LED Sensor Light, please read the user
manual carefully before use. The user manual includes an introduction to the product,
usage directions and as well as important safety information.
• Wattage : 5W
• Working Voltage : 24V
• Control Mode : Gesture Induction
• Working Temperature : 14°F ~140°F （-10℃~60℃）
• Dimensions(WxDxH) : 4.6 x 4.6 x 2.2 in（ 116 x116 x 56mm）
Specification：
How to use：
1、Assembly
•
The LED Sensor Light can be placed on any layer and any direction of the Freecube.
A Maximum of four LED Sensor Lights can be placed on one Freecube USB Power
Socket Base. The LED Sensor Light can be used once the metal connection is placed
on the Freecube.
2、Control Mode
• The LED Sensor Light is controlled by hand gestures. The sensor is located on the
upper side of the light fixture. The Light can be controlled by gently tapping or
sliding your hand over the sensor. During Light operation, please do not constantly
keep your hand over the light sensor, this can result in operation error.
3、Brightness Toggle
• Gently tap or slide your hand over the light sensor to adjust the brightness levels.
There are 3 levels of brightness adjustments, which are Off- > low brightness- >
middle brightness - > high brightness- >Off.
4、Color Mode
• To enter the color mode, touch the upper side of the light fixture or keep your hand
close to the light sensor for 2 seconds. To exit the color mode, touch or tap the light
sensor again, this will set the light as the current color displayed.
5、Music Rhythm Mode
• When the Freecube is connected with the Bluetooth speaker accessory, the light can
flash with the rhythm of the music. To enter the music rhythm mode, double tap the
light sensor. To exit the music rhythm mode, double tap the light sensor again. When
there are more than one LED Sensor Light connected to the Freecube, it can form a
rhythmic light post.
6、Linkage Setting
•
When there are 2 or more LED Sensor Lights connected to the Freecube, the lights can
be synchronized by sliding from bottom to top or from top to bottom. This makes it easy
for all lights to display the same color and brightness. When in music rhythm mode, the
sliding motion can make all the lights into a rhythmic mode and automatically arranged
in a sliding order.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions：
（1）this device may not cause harmful interference.
（2）this device must accept any interference received, including interference that may
cause undesired operation.
Made in China
Wireless Charger
( User Manual )
Item No: AFCC01
User Manual
Packing List:
Wireless Charger * 1
User Manual * 1
Product Appearance:
Thank you for choosing the Wireless Charger by AvatarControls. This product is part of
the Freecube series and will only function with the AvatarControls Freecube USB Power
Socket Base. For the best experience with your Wireless Charger please read the user
manual carefully before use. The user manual includes an introduction to the product,
usage directions and as well as important safety information.
Wireless
Charging Area
Non-Slip
Silicone Ring
Indicator Light
Indicator Light:
• OFF：No device is placed on the Charging Pad.
• Orange：Device is charging.
• Green：Device is fully charged.
• Red：Device placed on the Charging Pad but not compatible with the Charging Pad.
www.avatarcontrols.com
Precautions:
• Keep the charger away from water and other liquids.
• When cleaning the charger, first make sure it is disconnected from the power supply.
• To maximize the phone charging performance, please do not place metal pieces,
coins, or other debris on the charging area.
FAQ:
Q: Why isn't my phone charging on the pad ?
A: Please check if there are foreign matters on the charging area.
Q: What if the area is clean but phone still not charging ?
A: Please make sure the charger receiver is inserted in your phone in the correct
orientation.
1. Open and remove the top cover of the Freecube.
2. Place the metal connection face down on the socket.
How to use:
• Input : 24V/7W（MAX）
• Output : 5V/1A
• Transmission Distance : ≤0.24” (6mm)
• Maximum Charge Efficiency: ≤80%
• Working Temperature: 32°F~122°F ( 0℃~50℃ )
• Dimensions(WxDxH) : 4.6 x 4.6 x 0.75 in （116 x116 x 19mm）
Specification：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions：
（1）this device may not cause harmful interference.
（2）this device must accept any interference received, including interference that may
cause undesired operation.
Made in China
Warranty Card
User Name:
Address:
Contact :
Order Date:
Guarantee Clause:
• Within 7 days since goods are sold, if there is performance failure, commodity itself
and the outer package is complete (no scratches), can replace the sample type of
goods, not including man-made damage.
• The goods are guaranteed for one year from the date of sale. The accessories are
not covered by the warranty.
• The warranty service will be only effective under normal use.
• All the man-made damage, disassemble, stripping, improper use etc., is not covered
by warranty.
• The warranty card must be provided when ask for warranty. Failure to provide this card
or alter the card without permission, the company has privilege to refuse warranty.
Warranty Card
User Name:
Address:
Contact :
Order Date:
Guarantee Clause:
• Within 7 days since goods are sold, if there is performance failure, commodity itself
and the outer package is complete (no scratches), can replace the sample type of
goods, not including man-made damage.
• The goods are guaranteed for one year from the date of sale. The accessories are
not covered by the warranty.
• The warranty service will be only effective under normal use.
• All the man-made damage, disassemble, stripping, improper use etc., is not covered
by warranty.
• The warranty card must be provided when ask for warranty. Failure to provide this card
or alter the card without permission, the company has privilege to refuse warranty.
Warranty Card
User Name:
Address:
Contact :
Order Date:
Guarantee Clause:
• Within 7 days since goods are sold, if there is performance failure, commodity itself
and the outer package is complete (no scratches), can replace the sample type of
goods, not including man-made damage.
• The goods are guaranteed for one year from the date of sale. The accessories are
not covered by the warranty.
• The warranty service will be only effective under normal use.
• All the man-made damage, disassemble, stripping, improper use etc., is not covered
by warranty.
• The warranty card must be provided when ask for warranty. Failure to provide this card
or alter the card without permission, the company has privilege to refuse warranty.