User's Manual

–
–
13
10. Product specification
 Bluetooth compliance specifications: V4.0
 Operating frequency band: 2.4GHz ~ 2.48GHz unlicensed ISM band
 Output power: Class 2, up to 10 meters
 Support profiles: HSP, HFP, A2DP and AVRCP
 Support decoder: apt-X, SBC, MP3 and ACC
 Supports multipoint A2DP connection to two phones.
 Stand-by time: up to 640 hours/ 27 days.
 Talk time: up to 10 hours
 Play music time: up to 8 hours
 Battery charging time: about 3 hours
 Charger voltage: DC5.0V, 500mA
 Battery: Li-poly
The talk and standby times may vary when used with different mobile phones or other
compatible Bluetooth devices, usage settings, usage styles and environments. Playing
different music formats may also affect this.
14
11. Safety Information
 To avoid any damage or malfunction of the device, do not drop it from high places.
 Keep device away form humidity, water and any other liquid. If the device is
exposed to water, moisture or other liquid, do not operate it to avoid any electrical
shock, explosion and damage to the device or yourself.
 Do not place or keep this device near any heat source, such as direct sunlight,
radiators, stoves or other apparatus which produces heat. It may cause explosion,
degrade the performance and/or reduce battery life.
 Do not modify, repair or disassemble device (especially battery: it may cause an
explosion). Doing this will void the warranty.
 Do not place heavy objects on the device.
 Use only supplied and approved charger.
 Replacement or service must be done by qualified service center or manufacturer.
 Unplug this device when unused for long periods of time or during lightning storms.
CAUTION: ELECTRIC SHOCK HAZARD
The battery used in this device may present a risk of fire or chemical burn if
mistreated.
–
–
15
12. Declaration of Conformity
1) FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
 This device may not cause harmful interference.
 This device may receive interference, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radiofrequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
16
— Reorient or relocate the receiving antenna.
— Increase the distance between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
2) IC Statement
 This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject
 to the following two conditions:
 (1) this device may not cause interference, and
 (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
 Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication.
–
–
17
3）FCC/IC Radiation Exposure Statement:
This equipment complies with FCC/IC radiation exposure limits set forth for
uncontrolled environment .This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
EU
This product is CE certified according to the provision of the R&TTE Directive
(99/5/EC).
Declare that this product is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Trademark Statement
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
Avantree is a trademark owned by Avantronics Limited.
18
13. Warranty
Please refer to the warranty card included in the pack.
Technical support and product tutorial
For more information about this product and other Avantree Bluetooth Products,
including video user guides, product tutorials and online technical support, please refer
to www.avantree.com website.
Due to the nature of the products, there might be some software changes without notice.
Please always refer to the Avantree website for the latest information.