User's Manual

Optional:
z Travel charger/Car charger/Armband
3. Charging
Avantree Jogger Pro uses a 2.0mm jack charging socket.
1) For the first charge, please charge the device for at least
2.5 hours to make
sure the headset is fully charged and the battery reaches its full capacity.
2) Afterwards, each charge cycle will take up to 2.5 hours.
3) The LED will indicate red when charging and will turn off when charging is
complete.
4) If you have not used the item for a few months, the LED might not
immediately light red when first charging. In this case, it may take 15-35
minutes before the LED lights red.
Notice:
z Use an Avantree certified charger only. Or consult Avantree support before