. Product Description Avantree Jogger Pro (AS6P) is a lightweight Bluetooth stereo headphone with integral microphone. It is great for use during active pursuits, such as jogging and exercising. It has a trendy, fashionable sports design and is splash proof. The headset is equipped with Bluetooth 4.0 technology, so you can connect two devices simultaneously and enjoy excellent sound quality from the aptX codec. Immerse yourself in rich audio from your smartphone, Bluetooth enabled MP3 player or tablets.
. 1Product Overview (1). Speaker (2). Next (3). Led indicator (4). Previous (5). Headband (6). Charging socket (7). Multi-function button(MFB) (8). Microphone (9). Volume down (10).
Optional: z Travel charger/Car charger/Armband 3. Charging Avantree Jogger Pro uses a 2.0mm jack charging socket. 1) For the first charge, please charge the device for at least 2.5 hours to make sure the headset is fully charged and the battery reaches its full capacity. 2) Afterwards, each charge cycle will take up to 2.5 hours. 3) The LED will indicate red when charging and will turn off when charging is complete.
z using any other third party charger. When battery power is low, the red indicator LED will flash red once every 10 seconds and a “DUDU” sound will come up every one minute. 4. Turn on / off Turn on: From o ff, pre ss and hol d “MFB” for around 4 seconds, un til the LED indicator shows blue. Turn off: From on , pre ss and hol d “ MFB” for arou nd 4 se conds un til the LED indicator shows red. 5.
blue and red alternately. C. Search for the headset from your phone. D. Once “Avantree Jogger Pro’’ is found in the search list, follow the indicated steps and enter pin code 0000 to pair (some phones do not request the pin code). E. Connect the headset to your phone. F. Your headset is now ready for use. Once paired and connected, the headset will be automatically connected to your phone whenever you turn the headset on again, provided your phone is within range.
To answer a second call: Press “MFB” once to answer a second call and end the first call simultaneously. ● End a call: Press the “MFB” button once to end a call. ● Reject a call: Reject a call: Press and hold the “MFB” button for 3 seconds to reject a call. Reject a second call: Press the “Previous” button once to reject a second call. ● Voice Dial: Short press both ”V+” and “V-” whilst in standby mode, then say the voice tag you wish to call. (Note: Make sure your phone supports voice dialing.
Mute the microphone: Press and hold the “Next” button until you hear a short beep. In mute status, you will hear two short beeps every 3 seconds. Unmute the microphone: Press and hold the “Next” button again until you hear a further short beep. ● To Restore Default Settings: In standby mode (just turn it on), press and hold “Next” button for 8 seconds until the indicator flashes blue and red. The headphone has now been reset to its original settings.
z z z Pause : Press the “MFB” button again. Previous Track: Press the “Previous” button. Next Track: Press the “Next” button. Notes: 1) Some functions are dependent on the mobile phone being used with the headset. Therefore, certain features might not work with all phones as some phones do not support them. 2) For some phones, when power saving mode is activated with animated moving images, music output may be interrupted. If this happens, try changing the power saving mode to a non-moving image. 5.
5.4.2 Answer a second call during a call (3 way call or two link function) When a second call is received Press and hold ”V+” button for 2 seconds to hold the first call and answer the second call. Press “MFB” once to answer a second call and end the first call simultaneously. 5.4.3 Reject a second call during acall (3 way call or two link function) When a second call is received, press the “Previous” button once to reject the second call. 5.4.
6. Working with a PC or Laptop (Tutorial online) For computers running Microsoft Windows with Built-in Bluetooth supporting A2DP. For other systems, you might need a Bluetooth dongle to work with your computer. Your Bluetooth headset doesn’t need any special drivers to set up. For any updated driver information, please refer to your computer manufacturer or to the dongle manufacturer. 6.1 Pairing procedure: A. Ensure your computer has built-in Bluetooth as above and that Bluetooth is turned on. B.
Before streaming music, you need to change the sound settings. Go to “Control Panel” – “Sound” – “Playback” and change the audio setting to “Bluetooth Stereo Audio”. Controlling music while streaming ● Pause: During music streaming, press the “MFB” button to pause. Press the button again to resume streaming. ● Volume Up: Press and hold the “Volume +” button, or short press the button to get small, incremental increases.
three modes to “Bluetooth AV Audio” then save the settings. You will then be able to make Skype calls. 7. Product Specification z z z z z z z z z Bluetooth V4.0 with EDR Support profiles: Headset, Handsfree, A2DP, AVRCP Operational range: Class 2, 10 meters Battery: 170mA rechargeable lithium battery Talk time: up to 13 hrs Music time: up to 12 hrs Standby time: up to 40 days Headset weight: 23g Headset size: 85mm(L)x72mm(W)X25.
8. Safety Information z z z z z z z z To avoid any damage to or malfunction of the device, do not drop it from high places. Keep this device away from water, other liquids or high humidity environments. If the device is exposed to water, other liquids or excessive moisture, do not operate it. This will avoid risk of electrical shock to yourself and risk of explosion or further damage to the device.
CAUTIONS: ELECTRIC SHOCK HAZARD The battery in this device may present a risk of fire or chemical burns if mistreated. 9. Declaration of Conformity 9.1. EU This product is CE certified according to the provision of the R&TTE Directive (99/5/EC). We declare that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 9.2. Trademark Statement The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
Please refer the warranty card included in the pack.
Online Tutorial & Technical Support For more information about this product and other Avantree Bluetooth products, including video user guides, product tutorials and online technical support, please visit the www.avantree.com ‘Product Tutorial’ and ‘Download’ pages. Due to the nature of our products, there may be software updates made without notice. Please always refer to the Avantree website for the latest information.
Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
