User Manual

2
NFC
SBC codec
Working mode
LED ashes BLUE once every 7 seconds
LED ashes WHITE once every 7 seconds
LED ashes WHITE twice every 7 seconds
Headphones LED indicator
aptX codec
aptX Low Latency codec
LED indicators
Note: aptX Low Latency is supported when the headphones are paired with a transmitter that also
supports aptX Low Latency. This can be veried by the LED indications.
Connecting with a mobile phone
Use with one mobile phone
The rst time you turn on your headphones they will automatically enter pairing mode.
Step 1 While the headphones LEDs are ashing red and blue alternately, activate Bluetooth ® on your
phone and set it to search for new devices.
• iPhone ® Settings > Bluetooth > On*
• Android ™ Settings > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device.
Step 2 Select “Avantree Audition Pro” - If prompted, enter passkey 0000/accept connection.
Step 3 Once successfully paired, you will hear “your headset is connected”.
If you want to pair another phone, you can enter pairing mode by pressing and holding the “MFB”
button for 5 seconds until the LED ashes alternately blue and red.