Specifications

52
AVANTI Service Lift for Wind Turbines
E.13 Maintenance planning
Frequency Performed by Components
Daily Supervisor Control and safety devices of service tool kit
(only when mounted)
Annually AVANTI, or qualified personnel
authorised by AVANTI
Control and safety devices of service tool kit
(only when mounted)
E.11 Instructions for use at
intermediate and top platforms
To egress to intermediate and top platforms from service
tool kit:
1. Level service lift roof with platform floor.
2. Attach second fall arrest equipment to guiding ladder.
3. Release first fall arrest equipment from service anchor
point.
3. Climb over service tool kit fence and overpass platform
fence as specified by manufacturer.
4. Release fall arrest equipment from guiding ladder.
To access the service tool kit from intermediate and top
platforms:
1. Attach fall arrest equipment to guiding ladder.
2. Overpass platform fence as specified by manufacturer
and climb over service tool kit fence.
3. Attach second fall arrest equipment to the service anchor
point.
4. Release fall arrest equipment from guiding ladder.
E.12 Safety measures
If lift is stopped between platforms with unconscious per-
son on service tool kit:
1. Climb up to the lift.
2. Check that victim has no body parts extending through
service tool kit perimeter.
3. Enter the cabin through the bottom hatches.
4. Perform manual descent to the closest
platform.
5. Use a hand winch attached to a ladder to elevate the vic-
tim over service tool kit and to place him on platform floor.