Specifications

User’s, Installation and Maintenance Manual

11 PLATFORMS

Not OK

11.1

11.2

11.3

11.4

11.5

11.6

11.7

11.8

12 INFORMATION SIGNS AND DOCUMENTS

Not OK

12.1

12.2

13 FINAL ASSESSMENT

Not OK

13.1

Signature of competent(s):

ISSUE DESCRIPTION

Is the service lift installation in overall good operational condition?

Does the service lift pass freely through all platform openings without hitting the WTG

flanges, platform floors and platform fences?

Do platform fences fulfil specifications for proper mounting?

Are bolts of platform fences properly tightened so that there are at least 2 threads of the

bolt sticking out past the nut?

Are all the information signs and documents present and legible? (For example: Max. load

and PPE stickers.)

(If provided) Are the alignment stickers present on each platform and inside the cabin? Are

they installed so that lift stops aligned to each of the platforms?

(If provided) Are the send controls of top and bottom platform control boxes fully

functional?

(If provided) Are the safe zone plates properly installed and tightened?

Are the bottom and top mechanical stops properly installed and tightened?

Name of competent(s)

in capital letters:

Are the bottom and top limit plates properly installed and tightened?

Are the call controls of top and bottom platform control boxes fully functional?

Competent inspection may only be performed by AVANTI or qualified personnel authorised by AVANTI.

Every 12 months competent inspection has to be carried out, and the “Appendix B: Inspection checklist”

and the “Appendix C: Operation log sheet” must be completed for possible future reference.

