Specifications

41
User’s, Installation and Maintenance Manual
Appendix B: Inspection checklist
Serial nº traction system:
Serial nº traction system 2:
Tower nº:
Address of installation:
1
TRAVEL ZONE
OK
Not OK
1.1
2 CONTROL & SAFETY DEVICES
OK
Not OK
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10
2.11
2.12
2.13
2.14
2.15
2.16
2.17
2.18
2.19
2.20
2.21
3
CABIN
OK
Not OK
3.1
3.2
3.3
3.4
3.5
3.6
3.7
4
GUIDING SYSTEM
OK
Not OK
4.1
4.2
4.3
4.4
4.5
4.6
(If provided) Does the top limit switch sit and function properly?
(If provided) Does the door switch sit and function properly?
(If provided) Does the door guard locking switch (S19.3) sit and function properly?
Is the wear of the surface of the guiding rollers less than 2 mm?
Does the top hatch switch sit and function properly?
Does the emergency top and bottom limit switch function properly? Is it properly adjusted
at top and bottom platforms?
Does the fault light (red) light up when a safety switch is triggered? (Verify with all the
switches.)
Does the fault light (red) light up when an emergency stop button is triggered?
Are all the assembling screws of the cabin properly mounted and tightened?
Are the anti-derailment brackets properly installed and tightened?
Is the cabin free of cracks, dents and disparities?
Is the cabin clean and in overall good condition?
Is the wear of the surface of the counter guiding rollers less than 1 mm?
Are the guiding rollers properly installed?
(If provided) Does the platform switch (S18) sit and function properly?
Name of competent:
Serial nº ladder rack:
Does the bottom obstruction hatch switch sit and function properly?
(If provided) Does the bottom limit switch sit and function properly?
Date:
Lift nº:
Total hours of operation:
Does the top obstruction device compress when pushed and decompress when released?
Are its guiding shafts clean and lubricated?
(If provided) Does the platform light (green) light up when the service lift is at a platform?
Do the cabin control box buttons function properly?
Does the ready lamp (green) function properly?
Does the bottom obstruction device compress when pushed and decompress when
released? Are its guiding shafts clean and lubricated?
Are the anchor points free of cracks and dents? Do they have no permanent deformation?
Are the bolts properly tightened?
Are the steps and handles properly placed and tightened?
Is the outer surface of the guiding rollers uniform and free of damage?
Do the UP/DOWN lights (green) light up when lift ascends/descends respectively?
Do all emergency stop buttons interrupt lift control when activated?
Do the bottom obstruction switches interrupt descent when activated?
Do the top obstruction switches interrupt ascent when activated?
Does the bottom cabin hatch switch sit and function properly?
Is the travel zone clear of obstacles?
(If provided) Does the top floating frame switch sit and function properly?
Is the guiding ladder free of damage and properly installed?
Are the connecting screws between the ladder sections properly tightened?
ISSUE DESCRIPTION
ISSUE DESCRIPTION
ISSUE DESCRIPTION
ISSUE DESCRIPTION
Is the cabin control box without dents, cracks and disparities?