Specifications

39
User’s, Installation and Maintenance Manual
11.5 Electrical connections on site
Electrical connections must be made in
accordance with EN 60204-1 for CE versions and
in accordance with UL 508A for AECO version.
1. Install the top and bottom platform control boxes
and connect the cable connections and the
electrical boxes.
2. Use cable strips to attach
the fixed cable to the tower
internal (see Fig. 12).
3. Conect power supply cable.
11.6 Alignment stickers
1)
installation
1. Stick the alignment sticker
1)
inside the cabin next
to the grid of holes at a height of 1,5 m from cabin
floor.
2. There is an alignment sticker
1)
for each tower
platform. Stick the sticker
1)
on right ladder stile at a
height of 1,5 m from each platform, and with
triangle pointing to the left.
3. For top platform, and for ring shape platforms,
stick the sticker
1)
on right ladder stile at 0,9 m
under each platform, and with triangle pointing to
the left.
12. Disassembling
In accordance with local authority regulations
disassemble in reverse order and dispose.
1)
Mandatory for CE bucket type version. Not
available for CE full sliding door version.
Optional for AECO version.
Fig. 12
F
ALIGNMENT
STICKER
1)
POWER
CABLE
PLUG
POWER
CABLE
SUPPORT
POWER CABLE