ICE MAKER/MAQUINA DE DISPENSAR HIELO INSTRUCTION MANUAL/MANUAL DE INSTRUCCIONES Model Number / No. de Modelo: IMD250 BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. La sección en español empieza en la página 16. Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. Avanti Products, A Division of The Mackle Co., Inc. P.O. Box 520604 - Miami, Florida 33152 www.avantiproducts.
TABLE OF CONTENTS Ice-Maker Safety 3 Important Safeguides 4 Help Us Help You 5 Parts and Features 6 Important Safety Instructions 7 Installation Instructions 7 Before Using Your Appliance 7 Installation of Your Appliance 7 Using the Drip Tray 8 Electrical Connection \ Extension Cord \ Surge Protector 9 Operating Your Appliance 10 Control Panel Description 10 Operating instructions 11 Getting Ice from Ice-bin 12 Care and Maintenance 12 Cleaning Your Appliance 12 Space Requirem
ICE MAKER SAFETY YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT. We have provided many important safety messages in this manual for your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to Potential hazards that can kill or injure you and others. All safety messages will follow the safety alert symbol And either the words” DANGER”, “WARNING” or “CAUTION”.
IMPORTANT SAFEGUIDES Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, Including the following: Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord. It is recommended that a separate circuit, serving only your appliance be provided.
Help us help you… Write down the model and serial numbers. Read this guide carefully. You'll find them on a plate located on the rear wall of the ice maker. It is intended to help you operate and maintain your new ice maker properly. Please write these numbers here: Keep it handy to answer your questions.
PARTS AND FEATURES 1 2 3 4 5 6 7 8 9 10 11 12 13 Drip Tray Base Drip Tray Top Drain Plug Reservoir Drain Ice Dispenser Actuator Water Reservoir Reservoir Door Exhaust Fan Cover Ice Dispenser Outlet Control Panel Ice Maker Mechanism Ice Bin Cover (See – Thru) Water Funnel 6
Electrical connection WARNING IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS SERVICE CENTER. This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock.
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury when using your ice maker, follow these basic precautions: WARNING Read all instructions before using the ice maker. Danger or Warning: risk of child entrapment. Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous. . . Even if they will “just sit in the garage a few days.” Before you throw away your ice maker: Remove the ice-bin.
Use of drip tray Ensure the drain cap is securely in place before filling the water reservoir. Make sure to insert the drip tray under the front of the unit as shown below before using the ice maker.
OPERATING YOUR ICE MAKER Control Panel Description A B C D E F ADD WATER or Tank Empty Indicator ICE BIN FULL Indicator Cube Size Selection Indicator (Large / Small) Cube Size Selector Button Power ON Indicator Power ON / OFF Button Ice Size Selector (D) ICE SIZE SELECTION of (S) Small or (L) Large. The default cube size from the factory is set at SMALL. Each time you press this button the cube size selection will change 1 size (Small or Large) in sequence.
Operating Instructions Starting your Ice maker Open the reservoir cover door. Remove any dust or foreign objects that may be in the water reservoir Using the water fill funnel included with your unit, fill the water tank up to the area marked “MAX”: Turn the unit ON by pressing the “Power ON / OFF” button. Select desired ice cube size by pressing the “SELECT” BUTTON (S or L). The ice-maker will automatically check the water level in the reservoir periodically.
Dispensing ice. Place the glass or cup directly below the dispenser and press gently against the dispenser actuator. Remove the amount of ice as desired by continuously pressing against the dispenser actuator. Once the desired amount of ice has been dispensed release the dispenser actuator and the machine will stop dispensing ice. CARE AND MAINTENANCE Caution Failure to unplug the ice maker could result in electrical shock or personal injury.
PROBLEMS WITH YOUR ICE MAKER? You can solve many common ice maker problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. TROUBLESHOOTING GUIDE Problem The compressor works abnormally with a buzzing noise. Water shortage indicator Light is ON. Possible Cause The voltage is lower than required Suggested Solutions Stop the ice maker and do not restart until the voltage is normal.
Service For Your Ice Maker We are proud of our customer service organization and the network of professional service technicians that provide service on your Avanti ice maker. With the purchase of your Avanti ice maker, you can be confident that if you ever need additional information or assistance, the Avanti Products Customer Service team will be here for you. Just call us toll-free.
YOUR AVANTI PRODUCTS WARRANTY Staple your sales receipt here. Proof of original purchase date is needed to obtain service under warranty. WHAT IS COVERED LIMITED ONE-YEAR WARRANTY LIMITED SECOND THROUGH FIFTH YEAR WARRANTY For one year from the date of purchase by the original owner, Avanti Products will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use.
MEDIDAS DE PRECAUCION IMPORTANTES Para reducir el riesgo de un incendio, choque eléctrico o daños personales cuando use la máquina de dispensar hielo, siga estas precauciones básicas. ADVERTENCIA Lea todas las instrucciones antes de usar la máquina de dispensar hielo. Peligro o Advertencia: riesgo de niños atrapados. Los niños atrapados o sofocados no so un problema del pasado. Electrodomésticos abandonados aun son peligrosos…aun cuando “solo estarán en el garaje un par de días”.
Conexión Eléctrica ADVERTENCIA EL USO INAPROPIADO DEL ENCHUFE A TIERRA PUEDE OCASIONAR RIESGO DE UN CHOQUE ELECTRICO. SI EL CORDON SE DAÑASE, LLEVELO A UN CENTRO DE SERVICIO AUTORIZADO POR AVANTI PRODUCTS PARA QUE SE REEMPLACE. Para su seguridad, esta máquina de dispensar hielo debe estar apropiadamente conectada a tierra.
OPERANDO SU MÁQUINA DE DISPENSAR HIELO Descripción del Panel de Control A B C D E F Indicador para añadir agua Indicador del recipiente de lleno de hielo Botón para seleccionar el tamaño del hielo Indicador del tamaño del hielo Indicador de Encendido / Apagado Botón para Encender / Apagar la unidad POWER Presione para iniciar / parar el ciclo para dispensar hielo. Ice Size / Tamaño del hielo SELECCIÓN DE TAMAÑO DEL HIELO hay dos tamaños: (S) pequeño o (L) grande.
Instrucciones de Operación Iniciando el proceso con su máquina de dispensar hielo Hale el contenedor de hielo hacia ud. y retírelo. Remueva el polvo o cualquier objeto que esté en el tanque de agua. Utilice el recipiente que incluímos con la unidad para llenar el tanque de agua hasta el área marcada “MAX”. Seleccione el tamaño del hielo deseado y presione el botón (S) pequeño o (L) grande. La máquina de dispensar hielo automáticamente verifica el nivel de agua en el tanque.
CUIDADO Y MANTENIMIENTO Precaución Asegúrese de desconectar la máquina de dispensar hielo de la electricidad antes de limpiarla, de lo contrario puede ocasionar un choque eléctrico o daño personal. Limpiando su máquina de dispensar hielo Para asegurar la higiene en los cubos de hielo, el agua del tanque debe ser reemplazada cada 24 horas.
PROBLEMAS CON SU MÁQUINA DE DISPENSAR HIELO? Ud. puede resolver muchos problemas simples de máquina de dispensar hielo fácilmente, ahorrándose el costo de una visita del servicio técnico. Pruebe las sugerencias a continuación para ver si con ellas puede resolver el problema antes de llamar al técnico. GUIA PARA RESOLVER PROBLEMAS Problema El compresor no funciona normalmente, tiene un sonido. El indicador para añadir mas agua está encendido. Causa Posible El voltaje es menor que el recomendado.
THIS PAGE LEFT BLANK INTENIONALLY 22
Registration Information Thank you for purchasing this fine Avanti product. Please fill out this form and return it to the following address within 100 days from the date of purchase and receive these important benefits: Avanti Products, A Division of The Mackle Co., Inc. P.O.
PRINTED IN CHINA 24
