Instruction Manual
Table Of Contents
- PARTS AND FEATURES
- Door Handle Installation
- Note: Figures in the user manual are only for reference. The actual product may differ slightly.
- INSTALLATION INSTRUCTIONS
- OPERATING YOUR APPLIANCE
- CARE AND MAINTENANCE
- TROUBLESHOOTING GUIDE
- SERVICE FOR YOUR APPLIANCE
- INSTRUCCIONES EN ESPAÑOL
- Registration Information
PARTS AND FEATURES
DOOR HANDLE INSTALLATION
NOTE: FIGURES IN THE USER MANUAL ARE ONLY FOR REFERENCE. THE
ACTUAL PRODUCT MAY DIFFER SLIGHTLY.
The refrigerator must be disconnected from the electrical supply before attempting the
installation of any accessory.
①
①
②
②
③
the hole
the sc rew
③
④
④
(Photos may vary from actual unit)
① Remove the Allen head screw from the accessory bag; install them into the door holes; secure to the
door until they are tight but do not overtighten.
② Align the handles with the screws installed in step #1
③ Insert the screws through the holes at the sides of the handles, and tighten until secure. Do not
overtighten.
④ Place the screw hole cover in the hole to complete the installation.
1
Freezer Shelf
2
Freezer Temperature Control
3
Refrigerator Temperature
Control
4
Refrigerator Shelves (2)
5
Crisper Cover
6
Vegetable Crispers (2)
7
Leveling Legs (2)
8
Freezer Door with
Storage Bins (2)
9
Refrigerator Door with
Storage Bins (4)
7