Specifications

J326XP-IM-5AB
3-9
Operation
Entering Run Parameters
3
1 Press the ACCEL key to toggle between the MAX and SLOW acceleration settings.
• The selected setting lights.
Setting the Deceleration Rate
1 Press the DECEL key to toggle between the MAX, SLOW, and OFF deceleration settings.
• The selected setting lights.
Setting Up an Elutriation Run
Centrifuges equipped for elutriation have elutriation controls as shown in Figure 3.2, along with a
view port in the door and an elutriation power box mounted on the back of the control panel. See
the JE-5.0 elutriator rotor manual (JE5-IM) for complete rotor setup and operating instructions.
Figure 3.2 Elutriation Controls
ACCEL
MAX
SLOW
DECEL
MAX
SLOW
OFF
DELAY
ELUTRIATOR