Specifications

J326XP-IM-5AB

3-4

Operation

Entering Run Parameters

Selecting a Rotor

Turn the ROTOR knob until the rotor in use appears in the display.

• Small green LEDs by each rotor type abbreviation light one at a time, and the rotors of that

type appear consecutively in the display.

Setting Run Speed

Enter a run speed up to 26 000 rpm, or up to the maximum speed of the rotor in use. Or, enter a

relative centrifugal field (RCF) value up to the maximum achievable RCF of the rotor in use.

Setting RPM

Check to see if the red RPM light is lit on the display. (RPM is the default speed mode.)

a. If it is lit, go to step 3.

b. If the centrifuge is already in the

RPM mode, skip step 2 and go on to step 3.

Press the RPM/RCF key to select the RPM mode.

• On the display, the red

RPM LED lights.

ROTOR

JSP

JLA

JCF

RPM