Specifications

J326XP-IM-5AB
2-7
Description
Controls and Indicators
2
System Keys
START Pressed to begin a run. When START is pressed, the display immediately shows the
actual centrifuge values. The green START light flashes during acceleration until set
speed is reached, and then remains on continuously until deceleration begins.
STOP Pressed to end a run; the centrifuge decelerates to a complete stop according to the
deceleration setting. The red STOP light blinks during deceleration. Deceleration can be
terminated and the centrifuge restarted by pressing START.
CLEAR Pressed to stop the flashing of a diagnostic indicator light. See
CHAPTER 4, Troubleshooting, for information on diagnostic messages.
SET/ACTUAL Pressed to toggle the display view between set and actual values. The indicator for the
selected view will be lit.